Common Oil Filtration Machine Issues and How to Fix Them

Oil filtration machines play a very important role in keeping your hydraulic systems clean and running smoothly. But like all machines, sometimes they also face problems. At Ace Hydraulic Controls And Systems, we want to help you understand the common issues and how you can fix them easily.

5 ways to Improve Oil Filtration & Machine

1. Low Oil Flow or Pressure

Problem:

If your machine is showing low flow or low pressure, it can affect the filtration process.

Possible Reasons:

Clogged filters
Air leakage in the suction line
Weak or damaged pump

How to Fix:

Clean or replace the filters regularly
Check suction lines for air leaks
If pump is faulty, get it repaired or replaced

2. Overheating of the Machine

Problem:

The oil filtration machine is getting too hot while running.

Possible Reasons:

Continuous long use without rest
Cooling system not working properly
Oil level is too low

How to Fix:

Allow the machine to rest between cycles
Check the cooling system (fan, radiator, etc.)
Make sure oil level is at proper mark

3. Unusual Noise from the Machine

Problem:

The machine is making strange sounds while operating.

Possible Reasons:

Air trapped in the system
Bearings are worn out
Loose parts or bolts

How to Fix:

Remove air by proper bleeding
Replace damaged bearings
Tighten all fittings and bolts

4. Oil Not Getting Cleaned Properly

Problem:

Even after filtration, oil is still dirty or unclear.

Possible Reasons:

Filter elements are old or damaged
Wrong type of filter used
High contamination in oil

How to Fix:

Replace with correct filter elements
Use proper filtration machine for your oil type
Run multiple filtration cycles if oil is too dirty

5. Electric or Motor Issues

Problem:

Motor not starting or keeps tripping.

Possible Reasons:

Power supply problem
Overload on motor
Faulty wiring or loose connections

How to Fix:

Check and fix power supply
Reduce load on motor
Get wiring checked by a technician

Regular Maintenance Tips

Always clean filters and check oil level before use
Keep the machine in a clean and dry area
Service the pump and motor every few months
Use only genuine spare parts

Advantages of Oil Filtration Machines

Increases Equipment Life: Clean oil means less wear and tear on machinery. This increases the overall life of machines.
Reduces Maintenance Cost: By keeping oil clean, you avoid frequent repairs and part replacements.
Improves Machine Performance: Clean oil ensures smooth operation and better efficiency of hydraulic and lubrication systems.
Saves Money on Oil Replacement: Instead of changing oil often, you can filter and reuse it, which saves money.
Protects the Environment: Reusing oil after filtration reduces oil waste and helps protect the environment.

Applications of Oil Filtration Machines

Oil filtration machines are useful in many industries and areas:

Hydraulic Power Packs: For filtering hydraulic oil used in presses, injection moulding machines, etc.
Industrial Machinery: To maintain oil quality in gearboxes, compressors, turbines, etc.
Transformers: Used for purification of transformer oil to remove moisture and improve insulation.
Automobile & Transport: In service centres and workshops for engine oil and hydraulic oil cleaning.
Construction Equipment: Helpful in maintaining heavy equipment like excavators, cranes, etc.
Steel Plants and Manufacturing Units: To clean lube oil, coolant, and hydraulic fluids regularly.

Conclusion :

Taking care of small problems early can save you from big losses later. If you're facing any trouble with your oil filtration machine, don’t worry. Ace Hydraulic Controls And Systems is here to help you with expert advice and reliable service. Need help? Contact us today for maintenance, repair, or new oil filtration solutions.